Orison Logo
Hours: 8:30am-4:30pm CST M-Fri(800) 460-2403

Aluminox™

Aluminum Brightener

This stuff is amazing! It only takes 4 minutes to apply to a pontoon.pontoon brightener before after

Aluminox is a concentrated industrial strength acid brightener that is a safer alternative to traditional aluminum brighteners, such as hydrofluoric acid. Aluminox is a proprietary blend of acids and catalysts or "activators". The catalysts make the surface of the aluminum more reactive which allows the acid blend to be more productive on bare aluminum. 

This product will brighten aluminum and will remove road film without the negative hazards associated with most brighteners. Aluminox will quickly remove any aluminum oxide, leaving a fresh aluminum surface for welding, polishing, stripping, paint or pre-paint treatments. It is exceptional at cleaning polished stainless steel to a brilliant shine and quickly removes brake dust from wheels. Aluminox is biodegradable and, when pH neutralized, is safe for disposal in most municipalities.

ATTN: After Aluminox has been applied/rinsed, the aluminum is subject to oxidation again as the metal is unprotected. We recommend protecting your efforts with Oxi-X; please see step 6 under "Instructions" below.

pontoon brightener before afterAPPLICATIONS

  • Pontoons
  • Motorcycle/Auto Parts
  • Trailers/RV
  • Trim
  • Carts/Tables

BENEFITS AND FEATURES:

  • Rapidly removes oxide from aluminum and Al alloys
  • Brightens aluminum
  • Reduces sanding/polishing/buffing
  • Non-flammable
  • Biodegradable
  • Does not contain petroleum solvents
  • Replaces fluorides
  • Easy to use

 

Mill Finished Aluminum Cleaning:
On mill finish aluminum, (older pontoons and unpainted flat aluminum panels on aluminum trailers) the aluminum turns light gray as shown in the picture. The more you dilute the cleaner, the less grayish color you will get. Unfortunately it is extremely difficult for this type of aluminum to go back to the showroom finish. However, the whitish gray is 100% better than the oxidized black.

Polished Aluminum Finishes:
Aluminox will dull polished aluminum finishes (mirrored finishes/diamond plate). The only way to bring polished aluminum back to a reflective finish is to polish. However, cleaning with Aluminox will make the job much easier and in the case of pontoons, looks better without the reflective finish.

Check the following link for a better explanation of aluminum finishing:
http://www.prlog.org/10685102-aluminium-mill-finish-finish-or-not.html

 

DIRECTIONS: 

1 gallon concentrate makes 3 gallons RTU - Normal Duty
1 gallon concentrate makes 2 gallons RTU - Heavy Duty

1.) Clean dirt/algea/hard water deposits first.

2.) For general brightening of aluminum, dilute 1 part Aluminox Concentrate to 2 parts water. For extra-heavy oxidation (like pontoons) or when being used in cold weather, dilute 1 part Aluminox Concentrate to 1 part water.

3.) To prevent streaking, apply to surface with low pressure, start at the bottom and work  upward. For an even finish brush lightly to help remove oil and dirt. A pump-up chemical sprayer, equivalent pumping system or long handled brush is recommended for application (We suggest a bucket with a brush, its fast, easy, and avoids overspray and wind issues).

4.) Let sit for 1 minute then rinse well with water.

5.) Re-apply as desired.

    6.) IMPORTANT:oxi x corrosion inhibitor

    After Aluminox has been applied/rinsed, the aluminum is subject to oxidation again as the metal is unprotected. Appy 2-3 very thin coats of Oxi-X coating/protector (Pic Right) with a moist streak-free cloth for season long protection. 1 quart will do about 8 pontoons as pictured above.

CAUTION:

Due to wind mis-directing the fine spray, it is not recommended to use a hand trigger sprayer outdoors to apply this product. This product will dull polished aluminum surfaces; but is safe on chrome, steel and polished stainless steel (always test on small, inconspicuous area first as negative effects/discolorations are always a possiblity with acids). Do not allow to dry on surface. Avoid overspray onto vehicles or other fine-finish surfaces such as aluminum, paint or glass. Also, Aluminox is acidic and will etch concrete; it is best to apply on a non-concrete surface. Rinse well immediately if Aluminox comes in contact with concrete.

 

I used your product on a 2000 trailer that I recently purchased. I doubt the trailer had ever been washed since it was new. Thought you might like a picture of the progress in returning the trailer to a like new finish. Thanks, great product!


Bob,
Indiana





 

 

 

WARNING:

While Aluminox is safer than traditional aluminum brighteners, care must must still be taken when handling this product. Be sure to wear protective equipment when using this product; including safety glasses/shield, acid resistant gloves, apron and rubber boots. Rinse aluminum and equipment with water when done. Also, always test on small, inconspicuous area first as negative effects/discolorations are always a possiblity with acids.


Downloads & Links

Secure Transaction logoSECURE Ordering

credit card logo GSA Contract logo

FREE Shipping to lower 48 states!
55 Gallon Drums and 275 and 330 Gallon Totes are only shipped to Commercial Business locations. We will not ship drums or totes until the address has been verified as a commercial business address. If you require delivery to a residential address (or farm), please call 800-460-2403.