OXI-X Protective Coating
TYPICAL PROPERTIES
Form: Liquid
Color: White Opaque
pH: 10-11
VOC's: 0 g/l
Odor: None
Our exclusive new bonding agent provides extended oxidation protection in the harshest environments. Keep your pontoons and trailers bright by using Aluminox to brighten the dulled aluminum followed by OxiX for ultimate protection. OxiX is safe, fast, easy to use and environmentally friendly.
- Clear Protective Coating
- Fast, Easy Application
- Water Based
- Non-Hazardous
- No VOC's
- No CFC's
- Biodegradable
DIRECTIONS
For coating aluminum and fiberglass: Clean surface thoroughly with any high alkaline cleaner to remove dirt, oil and any wax or other protective coatings before applying. Do not use solvents or butlyl based cleaners as they can interfere with the adhesion process.
For non-polished aluminum: treat the surface as described above or with Aluminox Aluminum Brightener before coating. Apply OxiX to the surface thinly and evenly with a dampened streak-free microfiber cloth in circular motions or a quality paint/coating sprayer. The final appearance of OxiX on the surface may vary with the application method. 2 to 3 applications are recommended. Allow product to dry (Minimum 30 min. @ 70F) before each application.
Remember, a little goes a long way, put on the thinnest coat possible!
NOTE: We do not recommended Oxi-X if your boat stays in the water all the time. If that is your case, perhaps a wax would be an option.